SAFETY CLIP LANYARD USCL
- Widely used claw couplings to provide simple and reliable air tight connections
- Use of a safety locking pin is necessary to ensure full alignment of the matching holes, which in turn guarantees full engagement of the locking claws and precludes accidental disconnection
- European (Type A) and American (Type B) types have become established in Australia. They are not interchangeable except for sealing rubbers and safety clips
- Australian ( Type S ) not interchangable with A or B
- Comply to AS2554 and AS2660 Australian Standards.
SizeMade in 13mm (1/2") to 25mm (1") sizes, along with adaptors and plugs
Materials and SpecificationsIncluding Natural Rubber seal
TypeTwo Standards are supported by Pirtek: Type A: European (no stop point in lug area) Type B: American (stop point inside lug) Both types utilise the same safety clips and rubber seals, but are otherwise not interchangeable
Specifications/PerformanceMax. Working Pressure 3 500 kPa (500 psi) Max. Burst Pressure 7 000 kPa (1000 psi) Clamps: Use with Pirtek DBC or UCC (similar but with safety claws for positive engagement with the tail collar) as illustrated above
NotesPirtek's Lanyard for use with Universal Safety Clips makes sure that your Safety Clips never go missing. Available in a pack quantity of 25 as Product Code USCL
MaterialSpheroidal Graphite (SG) Iron
| Item | Coupling Size | Qty | Notes |
|---|---|---|---|
| USCL | All | 25 | Safety Clip Lanyard. Pirtek's Lanyard for use with Universal Safety Clips makes sure that your Safety Clips never go missing. |